| |
|
|
Why not refurbish
your old labellers?
|
Incredibly powerful Servo
Labeling System ready to go...
Many labellers out there
have very adequate conveyors, wrap belts, wipers, hold down
belts, but their label head is worn out.
This is
particularly true of clutch brake models, and stepper motor
labelers.
It is not just the cost of continual repairs
but the considerable cost of rework and/or lost production.
This hidden cost is
likely to add up easily to much more than simply replacing
the label heads, and a few bearings
The Herma H400 label
heads have everything built right in to the head. No
extra control box....simply mount the head and plug it in to
power.
Of course we have
mounting brackets, wrap belts, sensors and anything else you
might need too. We can give you an estimate to do the
job for you. Just send us pictures and we will give
you a price.
|
 |
|
|
So let us strip out the
heads and controls.......
Or you can......
|
| .....and replace them
with a Herma head that has no External Control
All the electronics
and servo controls specifically designed for a label head is
integrated into the Herma housing for the powerful 400 watt
servo.
Remarkably all the
necessary electronic options conceived over 100 years of
experience have also been integrated ready to be selected by
the user.
|
|
 |
|
Voila
The result is astonishing, a
virtually new labeller for a fraction of the cost. |
At the risk of
repeating what has been said about the H400 head here it is
again!
We select
the label height needed
Extension kits are available for
label height required.
The standard is 160mm (6"0) with extension kits for either
240mm (9") or 320mm (12") maximum label height
|
 |
 |
 |
Perfect
for the Role!
An Exclusive Herma feature is the
twist on/twist off Core and rewind holders.
Just twist a knob and the core is released to load fresh
Labels. The same system for the backing paper.
Just the faster label changes will probably pay for your
Head! |
 |
 |
Simple Touch Control
In case you need to
configure your
applicator, the clearly laid out display
panel allows for convenient and simple
adjustment to any needed operating parameters. |
 |
Optional Loose
loop
The loose loop system removes all tension in the web. It is
situated between the reel of labels and the label head. As
the labels are being dispensed, the separate loose loop
servo drive continually feeds fresh labels into into the
loose loop box. |
 |
 |
|
Optional Power
Unwind
A Power Unwind is
recommended when Large Label rolls are used or when heavy
(tall) labels are being used.
The standard reel is
300 mm diameter (11 1/2") and the power unwind reel is 350
mm (14")
The standard reel is
removed and the Power unwind is attached.
|
 |
 |
|
Optional Power
Rewind
Likewise a Power Rewind
is recommended when Large Label rolls are used or when heavy
(tall) labels are being used. It is also useful at very high
speeds of feed.
The Power rewind reel
is 250mm (10 ") in diameter.
|
 |
|
Right
and/or Left Hand
heads
Depending on the application both right hand and left hand
heads are available. |
 |
 |
It is important to
pick the correct heads or your labels will have to be
rewound.
The way we remember, is if you are sitting on the
conveyor and travelling down it, a Right hand head will be
on your right! |
 |
End Effects
The modular approach extends to the end where
interchangeable choices exist to suit an application
including several patented devices. |
 |
 |
 |
Shaped containers
A Unique pivoting air operated
beak for difficult applications often saves the day. |
 |
 |
|
|
|
|
